F Ball Styccobond F47 Pressure Sensitive Adhesive 15L

F Ball Styccobond F47 Pressure Sensitive Adhesive 15L

As a renowned supplier of premium quality products, we, at 'Flooring Masters', are proud to present our original, manufacturer-produced F Ball Styccobond F47 Pressure Sensitive Adhesive (15L). This specific product stands out due to its solvent-free acrylic polymer emulsion composition, designed for the secure application of sheet vinyl floor coverings on STOPGAP ISOLATOR MEMBRANES. The effectiveness of this adhesive is optimised when the Relative Humidity of the subfloor doesn’t rise above 92%. Notably, this adhesive dries to morph into a permanent tacky film, boasting superior resistance against plasticisers. Additionally, it is safely applicable over standard underfloor heating installations.

In instances where the Relative Humidity of the subfloor surpasses 92% or where mechanical fixings are required to infiltrate the adhesive film and membrane, STYCCOBOND F84 can be employed as an efficient alternative. For further information regarding other subfloor uses, our Technical Service Department is always on hand to assist. Several defining characteristics of the F Ball Styccobond F47 Pressure Sensitive Adhesive are its pale blue colour and viscous liquid consistency.

The dry period for this adhesive ranges roughly from 60 minutes onwards. This largely depends on factors such as temperature, humidity, and the method of application. When it comes to coverage rate, approximately 3 m² per litre is achievable using a STYCCOBOND FINE NOTCH trowel. For those utilising a 15mm x 5mm trowel, they can expect to cover around 5 m² per litre. As per these calculations, a single unit of the product offers coverage for approximately 75 m² (when using a 15mm x 5mm trowel) or 45 m² (if applying a STYCCOBOND FINE NOTCH trowel).